- Our spur shanks are made of mild steel, they come fully slotted, and fully beveled ready for you to weld them in place.
- # 2-Shank length 2.0 by 7/16th thickness
- -Slot fits a .125 thick flat style rowel, to fit an old time rowel you will need to heat and spread the shank end very slightly.
- -Pre drilled at 5/32 diameter since some folks use smaller rowel rivets, you will have to re-drill to fit a 3/16th rivet.
- Maximum rowel possible is 1 1/4"
- All Weld-On Shanks are sold in pairs
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
